Supercharger Cooling

Radiator









Removal and Installation

1. Drain the Supercharger (SC) cooling system. For additional information, refer to Supercharger Cooling System Draining, Filling and Bleeding Supercharger Cooling.

2. Disconnect the radiator-to-Charge Air Cooler (CAC) hose from the radiator and position aside.

3. Disconnect the radiator-to-coolant pump hose from the radiator.

4. Remove the 4 radiator bracket bolts and the radiator.
- To install, tighten to 9 Nm (80 lb-in).

5. To install, reverse the removal procedure.

6. Fill and bleed the SC cooling system. For additional information, refer to Supercharger Cooling System Draining, Filling and Bleeding Supercharger Cooling.