Quarter Window Trim Panel

Quarter Window Trim Panel

Removal and Installation

1. NOTE: On the coupe, install the front locating hook, then snap the A-pillar trim panel in place, working rearward.

Remove the 2 A-pillar trim panels. For additional information, refer to A-Pillar Trim Panel A-Pillar Trim Panel.

2. Remove the rear quarter trim panel. For additional information, refer to Quarter Trim Panel - Coupe .

3. Open the garment hook cover. Remove the bolt and garment hook.

4. Remove the upper front safety belt anchor bolt cover and bolt.
- To install, tighten to 48 Nm (35 lb-ft).

5. Remove the quarter window trim panel, by pulling outward.

6. To install, reverse the removal procedure.