Torque Converter
Torque Converter1. new or remanufactured torque converter must be installed if one or more of these statements is true:
^ A torque converter malfunction has been determined based on complete diagnostic procedures.
^ Converter stud or studs, impeller hub or bushing are damaged.
^ Torque converter discoloration (due to overheating).
^ Evidence of transmission assembly or fluid contamination due to these transmission or converter failure modes:
- Major metallic failure.
- Multiple clutches or clutch plate failures.
- Sufficient component wear which results in metallic contamination.
- Internal torque converter contamination present.