Roof Opening Panel Glass

ROOF OPENING PANEL GLASS

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Open the roof opening panel glass halfway.
2. Release the roof opening panel trough and position aside.

3. NOTE: Protect the painted surfaces around the roof opening panel opening.

Operate the roof opening panel glass and place in the vent position.

4. Remove the 6 screws and the roof opening panel glass.
- To install, tighten to 3 Nm (27 lb-in).

5. To install, reverse the removal procedure.
- Align the roof opening panel.
- Initialize the roof opening panel motor.