Anti-Theft - Perimeter

ANTI-THEFT

The perimeter anti-theft system consists of the following:
- Door ajar switches
- Door disarm switch
- Door lock control switch
- Hood ajar switch
- Horn
- Luggage compartment lid switch
- Remote keyless entry (RKE) transmitter
- RKE keypad
- Turn signal lamps
- Smart junction box (SJB)

The perimeter anti-theft feature is controlled by the SJB. The alarm can be armed by:
- pressing the LOCK button on the RKE transmitter.
- pressing the door lock control switch to LOCK with the accompanying door open.
- pressing the 7/8 and 9/0 buttons on the RKE keypad simultaneously.

The SJB then monitors all of the inputs and after 20 seconds, arms the perimeter alarm. In order to arm the alarm, all doors, hood and luggage compartment lid must be closed and the key must be out of the ignition switch. In the event of an unauthorized entry, the alarm will be activated by the SJB. When the alarm is activated, the SJB intermittently grounds the horn relay, causing the horn to sound, and intermittently powers the turn signals, causing the turn signal lamps to flash.

The perimeter alarm can be disarmed only by:
- pressing the UNLOCK button on the RKE transmitter.
- turning the door lock cylinder to the UNLOCK position.
- using a valid programmed key to turn the ignition switch to the ON position.
- entering the correct vehicle unlock code on the RKE keypad.