Wiper Pivot Arm

WIPER PIVOT ARM

Removal

1. NOTE: New wiper pivot arms need to be installed as an assembly.

Remove the 2 wiper pivot arm nut covers.

2. Remove the 2 nuts and the 2 wiper pivot arms.

Installation
1. Cycle and park the windshield wipers.







2. Install the wiper blade and pivot arm onto the pivot shaft.
- Align the wiper blades to 33-45 mm (1.29-1.77 inches) for the RH wiper blade, and 39-52 mm (1.53-2.05 inches) for the LH wiper blade.

3. Install the 2 wiper pivot arm nuts.
- Tighten to 28 Nm (21 lb-ft).
- If necessary, adjust the wiper pivot arms.

4. Install the 2 wiper pivot arm nut covers