Supercharger Belt

Supercharger Belt

Removal and Installation
1. Remove the accessory drive belt.
2. Using a suitable belt tensioner release tool, rotate the supercharger belt tensioner clockwise and remove the supercharger belt from the supercharger pulley.

3. NOTE: The supercharger belt is routed behind the supercharger belt tensioner.

Remove the supercharger belt tensioner bolt, the tensioner and the supercharger belt.
- To install, tighten to 48 Nm (35 ft. lbs.).

4. NOTE: Refer to the illustration for correct supercharger belt routing.

To install, reverse the removal procedure.