Plenum Chamber

PLENUM CHAMBER






Removal and Installation
1. Remove the instrument panel. Service and Repair
2. Remove the RH floor duct screw and the RH floor duct.
3. Remove the LH floor duct screw and the LH floor duct.
4. Remove the 4 defroster duct screws.
5. Detach the 2 demister ducts from the defroster duct.
6. Remove the defroster duct.
7. Remove the 2 defrost mode door actuator screws and position the defrost mode door actuator aside.
8. Remove the 2 panel mode door actuator screws and position the panel mode door actuator aside.
9. Remove the 2 plenum chamber bolts.
10. Remove the 2 plenum chamber screws.
11. Remove the plenum chamber.
12. To install, reverse the removal procedure.