Accessory Drive Belt Idler Pulley

Accessory Drive Belt Idler Pulley - 5.4L (4V)

Removal and Installation
All vehicles
1. Using a suitable belt tensioner release tool, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the coolant pump pulley.

Grooved idler pulley
2. Remove the bolt and the grooved idler pulley.
- To install, tighten to 25 Nm (18 ft. lbs.).

Smooth idler pulley
3. Remove the coolant tube bracket nut and position the coolant tube aside.
4. Remove the stud bolt and smooth idler pulley.
- To install, tighten to 25 Nm (18 ft. lbs.).

All vehicles

5. NOTE: Refer to the illustration for correct drive belt routing.

To install, reverse the removal procedure.