Supercharger Cooling

Coolant Pump





Removal and Installation
1. Drain the supercharger cooling system.
2. Disconnect the battery ground cable.
3. Remove the radiator grille.
4. Disconnect the coolant pump electrical connector.
5. Disconnect the coolant pump-to-degas bottle hose from the coolant pump and position aside.
6. Disconnect the coolant pump-to-radiator hose from the radiator.
7. Remove the 2 coolant pump nuts and the coolant pump.
- To install, tighten to 25 Nm (18 ft. lbs.).
8. To install, reverse the removal procedure.
9. Fill and bleed the supercharger cooling system.