Front

Brake Pads - 5.4L

Removal and Installation

Disc Brake System - Exploded View:

CAUTION: Install new brake pads in complete axle sets.

1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: Inspect and install new brake pad mounting hardware as necessary.

Remove the brake pad mounting pins and spring retainer clip.
- Remove the brake pads from the caliper assembly.

3. CAUTION: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.

Remove and discard the 2 brake caliper bolts and position the brake caliper aside.
- Support the brake caliper using mechanic's wire.
- To install, tighten to 115 Nm (85 ft. lbs.).

4. NOTE: Use a wood block or old brake pad to protect the caliper piston and dust boots. Use a soft cloth to protect the painted surface of the brake caliper.

Using a C-clamp or similar tool, compress the caliper pistons.
5. To install, reverse the removal procedure.
6. Apply the brake pedal several times before driving the vehicle.