Hood Latch: Service and Repair

HOOD LATCH

Removal and Installation
1. Remove the 6 pin-type retainers and the upper radiator sight shield.
2. Remove the front bumper cover.

3. NOTE: Mark the location of the hood latch to aid installation.

Remove the 2 hood latch bolts.
- To install, tighten to 12 Nm (9 lb-ft).

4. Disconnect the hood latch release cable.
5. Remove the hood latch.
6. To install, reverse the removal procedure.
- Adjust the hood latch for correct engagement after installation.
- Lubricate the hood latch after installation.