Flywheel: Service and Repair

Flywheel

Removal
1. Remove the clutch.
2. Remove the 8 bolts and the flywheel.

Installation

1. NOTE: Special bolts are used for flywheel installation. Do not use standard bolts.

Position the flywheel. Install the 8 bolts and tighten in the sequence shown in 2 stages.
- Stage 1: Tighten to 13 Nm (10 ft. lbs.).
- Stage 2: Tighten to 71 Nm (52 ft. lbs.).





2. Install the clutch.