External Controls

External Controls
The indicated position of the transmission floor mounted selector lever is transferred to the transmission through the cable and down to the manual control lever on the transmission.

Shift Interlock System
The brake/shift interlock mechanism is used on vehicles equipped with an automatic transmission. This system is used to prevent shifting from PARK unless the brake pedal is depressed. The brake/shift interlock system consists of an actuator attached to the key interlock assembly and necessary wiring. The shift interlock actuator is energized when the ignition switch is turned to the RUN position, locking the floor mounted transmission range selector lever in the PARK position. When the brake pedal is depressed, the shift interlock actuator is deactivated and the floor mounted transmission range selector lever can be moved out of the PARK position.

Transmission Control (TC) Switch
The transmission control (TC) switch is a momentary contact switch that is located on the floor mounted transmission range selector lever. Pushing the TC switch will either disengage or engage the overdrive function of the automatic transmission. If OVERDRIVE is disengaged, the word O/D OFF will illuminate on the instrument cluster.