Intake Air Duct: Service and Repair

AIR CLEANER OUTLET PIPE

Intake Air System Components - Exploded View:

Exploded View

Removal and Installation
1. Disconnect the 2 crankcase vent tubes from the air cleaner outlet tube and position aside.
2. Loosen the air cleaner outlet pipe-to-throttle body (TB) clamp.
- To install, tighten to 3 Nm (27 lb-in).

3. Loosen the air cleaner outlet pipe-to-air cleaner cover clamp and remove the air cleaner outlet pipe.
- To install, tighten to 3 Nm (27 lb-in).

4. To install, reverse the removal procedure.