EGR Electronic Vacuum Regulator Solenoid: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) VACUUM REGULATOR VALVE

Exhaust Gas Recirculation (EGR) System Components - Exploded View (Part 1):

Exhaust Gas Recirculation (EGR) System Components - Exploded View (Part 2):

Exploded View

Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the exhaust gas recirculation (EGR) vacuum regulator valve electrical connector.
3. Disconnect the EGR vacuum regulator valve vacuum connector.
4. Remove the 2 EGR vacuum regulator valve nuts.
- To install, tighten to 6 Nm (53 lb-in).

5. To install, reverse the removal procedure.