Inspection and Verification

INSPECTION AND VERIFICATION

1. Verify the customer concern.
2. Visually inspect for obvious signs of electrical damage.

VISUAL INSPECTION CHART

Electrical
- Smart junction box (SJB)
- Circuitry

3. Make sure the headlamps operate correctly. If the headlamps do not operate correctly, refer to Headlamp to continue diagnosis of the headlamps.
4. Make sure the parking brake is fully released.
5. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
6. If the concern remains after the inspection, verify the symptom. GO to Symptom Chart. Symptom Related Diagnostic Procedures