Exterior Mirror Glass

EXTERIOR MIRROR GLASS

Removal
1. Position the upper inner edge or the exterior mirror glass to its maximum inward travel.

2. WARNING: Place a shop towel between the exterior rear view mirror glass and the hand to avoid personal injury in the instance of glass breakage. Failure to follow this instruction may result in personal injury.

Grasp the outer edge of the exterior mirror glass and pull rearward, removing the mirror glass.
- If equipped, disconnect the heated rear view mirror glass electrical connectors.

Installation
1. If equipped, connect the heated rear view mirror glass electrical connectors.

2. NOTE: An audible click is heard during installation when the mirror is seated on the exterior mirror motor flanges.

Position the mirror glass and press firmly in the center of the glass until it snaps into place on the exterior mirror motor.