Transmission Fluid Cooler Hoses

Transmission Fluid Cooler Hoses

Material:

Removal
1. Remove and discard the transmission fluid cooler tube-to-hose clamps.
2. Remove and discard the transmission fluid cooler hose-to-cooler clamps.
3. Disconnect the transmission fluid cooler hoses from the tubes.
4. Disconnect the transmission fluid cooler hoses from the cooler.
5. Remove the transmission fluid cooler hoses from the retainer.

Installation
1. Install the transmission fluid cooler hoses into the retainer.
2. Connect the transmission fluid cooler hoses to the cooler.
3. Install 2 new transmission fluid cooler hose-to-cooler clamps.

4. NOTE: When connecting the cooler hoses to the cooler lines the white mark on the cooler tube must be aligned with the H mark on the hose.

Connect the transmission fluid cooler hoses to the cooler tubes.
5. Install 2 new transmission fluid cooler tube-to-hose clamps.
6. Fill the transmission with fluid and verify correct operation.