Seats: Description and Operation

SEATS

Front Seats
The front seats can be equipped with the following systems:
- Manual seat tracks
- Power seat tracks (driver only)
- Manual seat cushion height adjust (driver only)
- Manual backrest adjust (recline)
- Power lumbar adjust (driver only)
- Seat side air bags
- Occupant classification sensor (OCS) system on passenger seat

Seat Side Air Bags
Driver and passenger seat side air bags are attached to the seat backrest frame. For diagnostic information, or if the seat side air bag has deployed, refer to Air Bag Systems.

Front seat backrest trim covers installed on seats with seat side air bags cannot be repaired. Install new front seat backrest trim covers. Cleaning is permissible.

If a seat side air bag deployment took place, a new seat back foam pad, trim cover, seat side air bag module, bracket and nuts, U-nuts and bolts must be installed. Install a new seat backrest frame, if necessary.

Occupant Classification Sensor (OCS)
The OCS is standard equipment on all front passenger seats.

Rear Seats
The fold down rear seat backrests (coupe only) are a split (50/50) design and operate independently of each other.