Front Fender: Service and Repair

FENDER







Removal and Installation
1. Remove the front bumper cover.
2. Remove the fender splash shield.
3. Remove the 4 front rocker panel pin-type retainers and position the rocker panel aside.
4. Remove the 2 lower fender bolts.
- To install, tighten to 11 Nm (8 lb-ft).

5. Remove the fender bolt.
- To install, tighten to 11 Nm (8 lb-ft).







6. Remove the fender support nut through the door opening.
- To install, tighten to 11 Nm (8 lb-ft).

7. Remove the 4 top fender bolts and the fender.
- To install, tighten to 11 Nm (8 lb-ft).

8. To install, reverse the removal procedure.