Rear Bumper Reinforcement: Service and Repair

REAR BUMPER

Part 1:

Part 2:

Exploded View

Removal and Installation
1. Remove the rear bumper cover.
2. Remove the 2 pin-type retainers and the 2 rear bumper isolators.
3. Remove the bolts and the rear bumper.
- 8 required (vehicles built before 12/2005).
- 6 required (vehicles built after 12/2005).
- To install, tighten to 25 Nm (18 lb-ft).

4. To install, reverse the removal procedure.