Camshaft Roller Follower

Camshaft Roller Follower





Special Tool(s)





Material

Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the LH and RH valve covers.





3. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.





4. NOTE: Mark the position of the camshaft roller followers so they can be installed in their original positions.

Using the special tool, remove the camshaft roller followers.

5. NOTE: The camshaft roller followers must be installed in their original positions.

NOTE: Lubricate the camshaft roller followers with clean engine oil.

To install reverse the removal procedure.