| Piston-to-bore clearance rebuild | 0.020-0.040 mm |
| Piston-to-bore clearance service | 0.020-0.070 mm |
| Piston diameter | 84.77-84.80 mm |
| Pin bore diameter | 20.632-20.641 mm |
| Ring groove width compression (top) | 1.53-1.55 mm |
| Ring groove width compression (bottom) | 1.53-1.55 mm |
| Ring groove width oil | 4.008-4.032 mm |
| Ring groove width compression ring (top) to ring groove clearance | 0.04-0.08 mm |
| Ring groove width compression ring (bottom) to ring groove clearance | 0.06-0.09 mm |
| Squish height | 0.908-1.858 mm |
| Piston pin length | 66.2-67.0 mm |
| Diameter standard | 20.622-20.631 mm |
| Pin to piston clearance | 0.007-0.013 mm |
| Pin to rod clearance | press fit - 8 KN |