Windshield Washer Reservoir

REMOVAL







1. Remove the bolt.







2. Remove the nut.
3. Remove the RH front wheel.







4. Remove the four screws, the pin-type retainer and remove the RH front inner fender well.







5. Disconnect the washer hose and the electrical connector from the washer pump.

WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL WHICH IS POISONOUS. OBSERVE ALL CAUTIONS AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.

NOTE: The windshield washer reservoir will drain when the washer hose is disconnected.







6. Remove the bolt and the washer reservoir.

INSTALLATION
1. To install, reverse the removal procedure.