Antenna, Phone: Service and Repair

REMOVAL







1. Disconnect the vehicle cellular phone antenna base cable.







2. Cut the two-way tape holding the vehicle cellular phone antenna base to the glass.
^ Remove the vehicle cellular phone antenna base.

CAUTION: To avoid damage to the glass, do not pry on the vehicle cellular phone antenna base when removing.

INSTALLATION

NOTE: Use a suitable glass cleaner to thoroughly clean the glass and vehicle cellular phone antenna base contact surfaces.

1. Install the two-way tape on the vehicle cellular phone antenna base.







2. Attach the vehicle cellular phone antenna base to the glass.

NOTE: The inside and outside vehicle cellular phone antenna bases must be carefully and accurately aligned with each other.







3. Connect the vehicle cellular phone antenna base cable.