Canister Purge Solenoid: Service and Repair

REMOVAL
1. Remove the EVAP canister with bracket assembly.
2. Remove the Evaporative Emissions canister (EVAP canister) from the evaporative emission canister bracket.
3. Remove the canister vent solenoid.

INSTALLATION
1. Follow the removal procedure in reverse order.
2. Perform Evaporative Emission Canister leak test procedure. Evaporative Emission Canister Assembly Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. EVAP Running Loss System Repair Verification