Push Connect Fittings

Push-connect fittings on flexible-fuel vehicles:
- are part of braided, stainless steel fuel lines used only on flexible fuel vehicles.
- are used at fuel tank inlet and outlet tubes at the fuel pump module, fuel filter inlet and outlet on flexible fuel vehicles.
- require Fuel Line Disconnect Tool Set T90T-9550-S for removal.

Fuel vapor tube push-connect fittings:
- are used on all vehicles.
- can be removed by hand by squeezing connector to disconnect. No tool is needed for removal.
- are used on evaporative emission tubes at the evaporative emission tube shut off valve, purge line connection and Evaporative Emissions (EVAP) canister.