Flexible Fuel Sensor: Service and Repair

REMOVAL

1. Depressurize fuel system.

2. Remove upper and lower supply line quick disconnect secondary retaining clips from fittings. Disconnect fuel lines from Flexible Fuel (FF) sensor.

3. Remove FF sensor bracket retaining screws and remove.

INSTALLATION

1. Install FF sensor, bracket and retaining screws. Tighten retaining screw 5.2-7.2 Nm (47-63 lb in).

2. Connect fuel lines to FF sensor. Install upper and lower supply line quick disconnect secondary retaining clips to fittings.

3. Start engine and check for leaks.