High Cold Idle RPM After Recall 91E08 Performed

Article No.
93-3-6

February 3, 1993

^ IDLE - 3.0L - HIGH COLD IDLE RPM AFTER EMISSIONS RECALL 91E08 PERFORMED - LX MODELS WITH 4EAT TRANSMISSIONS

^ EMISSIONS RECALL 91E08 - 3.0L - HIGH COLD IDLE RPM AFTER RECALL PERFORMED - LX MODELS WITH 4EAT TRANSMISSIONS



FORD: 1990-91 PROBE


CALIBRATION: 0-10B-R00, 1-10B-R10

WARNING:
THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.

ISSUE:
A high cold idle rpm condition may exist after Emissions Recall 91E08 has been performed on certain 1990 Probe LX model vehicles. This occurs because of the powertrain control module program. condition on these models.

ACTION:
Install a revised powertrain control module. Refer to the 1991 Probe Service Manual, Section 18-00, for installation details. (Similar concerns have also been identified on certain 1991 Probe LX models. A revised module will also resolve the condition on these models.)





Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of alterations performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.



PART NUMBER PART NAME CLASS

F1PZ-12A650-EA Powertrain Control Module B

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS:
Eligible Under Basic Warranty Coverage, Emissions Warranty Coverage

OPERATION DESCRIPTION TIME
930306A Replace PCM 0.4

DEALER CODING
BASIC PART NO. CONDITION CODE
12A650 08

OASIS CODES: 619400