Auxiliary Cluster

1. On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Pull trim cover at bottom edge and slide out of tabs at top edge.
4. Remove three cluster to console attaching screws. On Tempo models, remove four cluster to console attaching screws, then pull cluster outward and disconnect electrical connector.
5. Remove cluster from console.
6. Reverse procedure to install.
7. On models equipped with airbag, rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.