Wiper Blade and Pivot Arm Adjustment - Windshield

Wiper Blade and Pivot Arm Adjustment - Windshield

General Procedure

1. Cycle and park the windshield wipers.

2. Verify the RH (Right Hand) and LH (Left Hand) windshield wiper blades are located at the alignment marks on the windshield glass.





3. NOTE: Make sure that there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.

If necessary, remove the windshield wiper pivot arms and reposition them to the alignment marks on the windshield glass. REFER to Wiper Pivot Arm - Front .