Component Description

Safety Belt System - 3rd Row

Component Description

Child Safety Seat Tether Anchor

The child safety seat tether anchor is a metal loop welded to the RH (Right Hand) seat cushion frame. The LH (Left Hand) seat is not equipped with a child safety seat tether anchor. Refer to the Owner's Literature for child safety seat tether anchor location information.

If a child safety seat was in use during a collision, inspect the child safety seat component mounting areas, repair any damage and restore the vehicle to the original production configuration.

Child Safety Seat Tether Anchor - Lower Anchors and Tethers for Children (LATCH)

The Lower Anchors and Tethers for Children (LATCH) are metal loops welded to the seat cushion frames. Refer to the Owner's Literature for Lower Anchors and Tethers for Children (LATCH) locations.

If a child safety seat was in use during a collision, inspect the child safety seat component mounting areas, repair any damage and restore the vehicle to the original production configuration.

Safety Belt Buckle

The third row safety belt buckles are used in conjunction with the safety belt retractors.

When replacing safety belt system components, use only the replacement parts specified in the Ford Catalog Advantage or equivalent.

Safety Belt Retractor

Each third row safety belt retractor has both the ALR (Automatic Locking Retractor) and ELR (Emergency Locking Retractor) features.

When replacing safety belt system components, use only the replacement parts specified in the Ford Catalog Advantage or equivalent.