Turn Signal and Hazard Lamps: Overview

Turn Signal and Hazard Lamps

Overview

The turn lamp system consists of:

- Front turn lamps

- Rear lamp assemblies

- Outside rear view mirrors

- Multifunction switch

- SCCM (Steering Column Control Module)

- FCIM (Front Controls Interface Module)

- BCM (Body Control Module)

When the multifunction switch is placed in the left or right TURN position, the corresponding turn lamps flash on and off.

The hazard flasher switch is located in the center instrument panel finish panel (integrated into the FCIM (Front Controls Interface Module)). When the hazard function is active, all the turn lamps flash on and off.

The front turn signal indicator lamps are integrated into the headlamp assemblies.

The rear turn signal indicator lamps operate independently of the stoplamps.