Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting

2. Remove the oil pan. REFER to Oil Pan .

3. NOTE: A new gasket must be installed.
Remove the 2 bolts and the oil pump screen and pickup tube.

- Discard the gasket.
- To install, tighten to 10 Nm (89 lb-in).





Installation

1. To install, reverse the removal procedure.