Component Description

Rear View Mirrors - Exterior, Power Folding

Component Description

Exterior Mirror Control Switch

The exterior mirror control switch is integral to the master window control switch. The power fold mirror control switch provides the driver with the controls to fold or unfold the driver and passenger mirror. The power fold mirror control switch is integral to the master window control switch. When the ignition is ON and the power fold control switch button is pressed, a signal is sent to the DSM (Driver Seat Module). The DSM (Driver Seat Module) then supplies voltage and ground to the power fold motors to fold or unfold the mirrors.

Driver Seat Module (DSM)

The DSM (Driver Seat Module) incorporates multiple functions into one module and offers diagnostics to easily locate and repair concerns affecting the subsystems that it controls. The power folding mirrors are controlled by the DSM (Driver Seat Module). The DSM (Driver Seat Module) is capable of setting DTCs (Diagnostic Trouble Codes) for the memory and power folding mirrors when a system concern exists. For additional information on the DSM (Driver Seat Module), REFER to Driver Seat Module (DSM) .

Exterior Mirror

Each optional power fold exterior rear view mirror has an internal motor to fold or unfold the mirror that is not replaceable. If a power folding mirror drive motor is found to be inoperative, a new power folding exterior rear view mirror assembly must be installed