Catalytic Converter - LH Manifold

3.5L LH Catalytic Converter and Exhaust Pipes









Install 6 new LH (Left Hand) catalytic converter manifold-to-cylinder head studs.
Tighten to 12 Nm (106 lb-in).

Install a new gasket, the LH (Left Hand) catalytic converter manifold and 3 new lower LH (Left Hand) catalytic converter manifold-to-cylinder head nuts.
Tighten to 25 Nm (18 lb-ft).

Install the 3 new upper LH (Left Hand) catalytic converter manifold-to-cylinder head nuts.
Tighten to 25 Nm (18 lb-ft).

Install the heat shield and the 3 heat shield bolts.
Tighten to 12 Nm (106 lb-in).