Oil Pick Up/Strainer: Service and Repair

Oil Pump Screen and Pickup Tube

Removal

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.

1. Remove the oil pan. REFER to Oil Pan.

2. Remove the 2 bolts and the oil pump screen and pickup tube.

- Discard the O-ring seal.






Installation

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.

1. Using a new O-ring seal, install the oil pump screen and pickup tube and the 2 bolts.
- Tighten to 10 Nm (89 lb-in).





2. Install the oil pan. REFER to Oil Pan .