Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner - 4.0L SOHC

Removal and Installation

1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.





2. Remove the bolt and the accessory drive belt tensioner.
- To install, tighten the bolt to 47 Nm (35 lb-ft).

3. To install, reverse the removal procedure.
- For correct belt routing, refer to Accessory Drive Description and Operation, Accessory Drive Belt Routing, Front End Accessory Drive (FEAD) - 4.0L SOHC in the Description and Operation.