Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry

Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry

Removal

1. Remove the 2 screws and the latch feet release bar.

2. Release all the cushion trim cover retainers and pin-type retainers.

3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the hook-and-loop strips and separate the cushion trim cover from the cushion foam pad.

4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

To install, reverse the removal procedure.

- Make sure the lower anchor and tethers for children wires at the rear of the cushion frame are positioned through the cushion trim cover and accessible for use after installation.