Seat Cushion Cover - Second Row, 40 Percent E-Z Entry

Seat Cushion Cover - Second Row, 40 Percent E-Z Entry

Removal and Installation

1. Remove the 2 screws and the latch feet release bar.

2. Release all the cushion trim cover retainers and pin-type retainers.

3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the hook-and-loop strips and remove the cushion trim cover from the cushion foam pad.

4. To install, reverse the removal procedure.
- Make sure the lower anchor and tethers for children wires at the rear of the cushion frame are positioned through the cushion trim cover and accessible for use after installation.