A-Pillar Trim Panel

A-Pillar Trim Panel

Removal and Installation

1. Remove the 2 assist handle bolt covers.

2. Remove the 2 assist handle bolts.
- To install, tighten to 10 Nm (89 lb-in).

3. Remove the assist handle.

4. Position the door opening weatherstrip aside.

5. NOTE: The clip on the LH A-pillar trim panel must remain in the sheet metal. The clip comes off the A-pillar trim panel when the panel is removed.

Remove the A-pillar trim panel.

6. To install, reverse the removal procedure.