Transmission Selector Lever

Transmission Selector Lever





Removal
1. Remove the center console.





2. Disconnect the selector lever cable from the selector lever.





3. Disconnect the selector lever cable from the selector lever housing.





4. Disconnect the electrical connector.





5. Disconnect the wiring harness from the selector lever housing.





6. Remove the 4 nuts and remove the selector lever housing from the vehicle.

Installation





1. Install the selector lever housing.
^ Tighten to 12 Nm (9 lb-ft).





2. Connect the wiring harness to the selector lever housing.





3. Connect the electrical connector.





4. Install the selector lever cable onto the selector lever housing.





5. Connect the selector lever cable onto the selector lever.
6. Install the center console.