Seat Cushion Cover - Second Row, 60 Percent E-Z Entry

SEAT CUSHION COVER - SECOND ROW, 60 PERCENT, E-Z ENTRY

Removal and Installation
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.

3. CAUTION: Use care when separating the cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from the cushion foam pad.

Release the hook and loop strips and separate the cushion trim cover from the cushion foam pad.

4. To install, reverse the removal procedure.
- After installation, make sure the LATCH and safety belt buckles are accessible to the occupants.