D-Pillar Trim Panel

D-PILLAR TRIM PANEL

Removal and Installation

Vehicles with third row seating







1. Remove the rear cargo management system.
- Remove the screw.
- Remove the pushpin.
- Remove the system.

2. Remove the D-pillar lower safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

All vehicles
3. Position the liftgate opening weatherstrip aside.







4. Remove the rear upper headliner trim panel.
5. Remove the D-pillar trim panel.
6. To install, reverse the removal procedure.