Rear Drive Axle/Differential - Ford 9.75-Inch Ring Gear

Drive Pinion Seal

Special Tool(s):

Material:

Removal
1. Remove the pinion flange.





2. Force up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.

Installation
1. Lubricate the new pinion seal with grease.





2. CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and install a new one.

Using the special tool, install the pinion seal.
3. Install the pinion flange.