Fuel Tank Mounting Straps: Service and Repair
FUEL TANK SUPPORT STRAPSPart 1:
Part 2:
Part 3:
Exploded View
Removal and Installation
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If equipped, remove the 3 bolts, 2 nuts and the fuel tank skid plate.
- To install, tighten to 40 Nm (30 lb-ft).
3. Remove the driveshaft.
4. Using a suitable jack, support the fuel tank.
5. Remove the bolt and the fuel tank rear support strap.
- To install, tighten to 55 Nm (41 lb-ft).
6. Remove the nut and the fuel tank front support strap.
- To install, tighten to 55 Nm (41 lb-ft).
7. To install, reverse the removal procedure.