Floor Console - Front

FLOOR CONSOLE - FRONT







Removal and Installation
1. Remove the floor console finish panel mat.
2. Remove the floor console center finish panel screw.
3. Remove the floor console center finish panel.
4. Disconnect the floor console electrical connector.
5. Remove the 2 floor console screws.
6. Position the front seats forward.
7. If equipped, remove the floor console bolt cover.
8. Remove the 4 floor console bolts.
- To install, tighten to 9 Nm (80 lb-in).







9. Release the 2 floor console front clips.
10. Remove the floor console.
11. To install, reverse the removal procedure.