Auxiliary Transmission Fluid Cooler - Oil-to-Air Fluid Cooler

Auxiliary Transmission Fluid Cooler - Oil-to-Air Fluid Cooler, TorqShift





Material

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Remove the four upper grille screws.





3. Remove the lower retaining clips and remove the grille.





4. Remove the left front lower air deflector push pin.





5. Remove the right front lower air deflector push pin.





6. NOTE: The LH and RH air deflectors must be positioned out of the way to access the retaining bolts.

Remove the LH and RH upper auxiliary transmission fluid cooler retaining bolts.





7. Disconnect both the LH lower splash shield push pins.





8. Disconnect both the RH lower splash shield push pins.





9. Remove the four lower splash shield push pins.





10. If equipped, remove the six retainers and remove the lower bumper filler.





11. If equipped, remove the power steering cooler retaining bolts and position the power steering cooler out of the way.





12. Disconnect the LH lower splash shield push pin to gain access to the A/C condenser bracket.





13. Disconnect the RH lower splash shield push pin to gain access to the A/C condenser bracket.





14. Disconnect the LH auxiliary transmission fluid cooler hose.





15. Disconnect the RH auxiliary transmission fluid cooler hose.





16. Remove the LH lower A/C condenser bracket.





17. Remove the RH lower A/C condenser bracket.





18. NOTE: The auxiliary transmission fluid cooler must be lifted up off the lower frame and moved toward the front of the vehicle so the lower brackets can clear the frame.

NOTE: It is necessary to move the A/C condenser toward the front of the vehicle to remove the auxiliary transmission fluid cooler.

Remove the bolts and the auxiliary transmission fluid cooler.

Installation





1. NOTE: It is necessary to move the A/C condenser toward the front of the vehicle to install the auxiliary transmission fluid cooler.

Install the auxiliary transmission fluid cooler and the bolts.





2. Install the RH lower A/C condenser bracket.





3. Install the LH lower A/C condenser bracket.





4. Connect the RH auxiliary transmission fluid cooler hose.





5. Connect the LH auxiliary transmission fluid cooler hose.





6. Connect the RH lower splash shield push pin to gain access to the A/C condenser bracket.





7. Connect the LH lower splash shield push pin to gain access to the A/C condenser bracket.





8. If equipped, install the power steering cooler and install the retaining bolts.





9. If equipped, install the lower bumper filler and install the six retainers.





10. Install the four lower splash shield push pins.





11. Connect both the RH lower splash shield push pins.





12. Connect both the LH lower splash shield push pins.





13. NOTE: The LH and RH air deflectors must be positioned out of the way to install the retaining bolts.

Install the LH and RH upper auxiliary transmission fluid cooler retaining bolts.





14. Install the RH front lower air deflector push pin.





15. Install the LH front lower air deflector push pin.





16. Install the grille into the four lower retaining clips.





17. Install the four upper grille screws.
18. Fill to correct level with clean automatic transmission fluid.