Shift Solenoid: Service and Repair
Automatic Transmission/Transaxle - TorqShiftShift Solenoids (SS)
Removal and Installation
NOTE: Some solenoid body bolts and wire loom bolts will need to be removed in order to remove affected solenoids.
NOTE: The solenoid body will need to be removed to remove line pressure solenoid.
1. Remove the transmission fluid pan, gasket and filter.
2. Disconnect the affected shift solenoid electrical connector.
3. Remove the affected shift solenoid.
1 Remove the retaining "E" clip.
2 Remove the affected shift solenoid.
4. To install, reverse the removal procedure.